Epoxy.com Mortars and Grouts
Depending on how you mix the aggregate into the products below, they can be
used as a mortar for overlays, or a grout for sealing between other hardened
construction materials. Contact Epoxy.com Technical Support Department with your
specific project and questions.
- Epoxy.com Product #10 Lo-Mod
Adhesive and Mortar Binder is a 100% solids epoxy has a low modulus
of elasticity (flexibility) and is Low Viscosity. An adhesive used as a binder
for epoxy mortar systems in patching and grouting applications, as a seal coat
for non-skid surfaces outside, and as a primer to insure high bond strength for
coatings and patches.
- Epoxy.com Product #10 Fast
Curing Version
- Epoxy.com Product #10 Cold
Temperature Curing Version
- Epoxy.com Product #14 Pigmented Mortar - Replace by
Epoxy.com Product #24
- Epoxy.com Product #15 Chemical
Resistant Flooring Resin - a two component, seamless 100%
solids epoxy resurfacing system with High Chemical Resistance. It may be
applied as a coating, or combined with silica sand or
Epoxy.com multi-colored quartz aggregate to produce a durable, easy to
maintain floor, on both new and old surfaces.
Epoxy.com Product #15 Chemical Resistant Flooring Resin has superior
clarity and UV stability.
- Epoxy.com Product #16 Epoxy
Mortar Resin - Replaced by
Epoxy.com Product #24
- Epoxy.com Product #17
Decorative Stone Overlay Adhesive Resin - a two component,
100% solids high-mod epoxy adhesive used for bonding stone and other
aggregates in all types of flooring applications. Some uses would include
patios, pool decks, walkways and other areas where a long wearing and
decorative system is desired.
- Epoxy.com Product #18 General
Purpose Epoxy - a hard set epoxy compound formulated for
general use. Epoxy.com Product #18 cures at room temperature and is a low
viscosity system. This durable, resilient material requires no post curing
to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this
product easy to use. Epoxy.com Product #18
General Purpose Epoxy solves many difficult bonding, and epoxy mortar
problems. Product has the ability to bond to a variety of substrates
including cannot dry and hard to dry surfaces.
- Epoxy.com Product #19
its new stock numbers are Epoxy.com Product
#24 (for the pigmented) and Epoxy.com
Product #28 for clear.
- Epoxy.com Product # 24
Pigmented Mortar is a multipurpose colored epoxy binder for
Epoxy.com Mortar Systems This all purpose epoxy resin is
characterized as an excellent general purpose material with good clarity and
color retention. It is essentially odorless and can therefore be used in
occupied areas.
- Epoxy.com Product #24 Fast
Pigmented Mortar - Fast Cure
- Epoxy.com Product #24 Cold
Pigmented Mortar - Cold Temperature Cure
- Epoxy.com Product #25 Epoxy
Mortar Kit standard - a 100% solids epoxy resin and specially
selected aggregate system. Units are preproportioned for ease of mixing and
use on the jobsite. It is a flowable, self-leveling grout, with handling and
physical characteristics superior to similar grouts.
- Epoxy.com Product #28 Epoxy
Mortar - Honey Clear Mortar 4:1 Ratio a multipurpose colored
epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is
characterized as an excellent general purpose material with good clarity and
color retention. It is essentially odorless and can therefore be used in
occupied areas.
-
Epoxy.com Product #224 Water Cleanable Epoxy Mortar Resin
is a user friendly, water cleanable, 100% solids epoxy grout and
adhesive. Used for grouting ceramic tile, brick pavers, and stone, it is
supplied in pre-packaged kits containing resin, hardener, and (in the
Epoxy.com
Product #225 Water Cleanable Epoxy Mortar Resin Kit) mineral fillers
that produce a dense, uniform seal. Typical applications for #224
require resistance to thermal shock, chemicals, and heavy traffic
including meat packers, breweries, canneries, bottlers, CIP areas, and
pharmaceutical formulators.
-
Epoxy.com Product #225 Water Cleanable Epoxy Mortar Kit -
includes Epoxy.com
Product #224
along with the aggregate. Mix the three components together for a ready
to use system.
-
Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and
Adhesive is a highly chemical resistant, industrial grade,
Novolac epoxy grout for ceramic tile, quarry tile, brick pavers, and
stone.
Epoxy.com Product #235 Chemical Resistant Novolac Epoxy Tile Grout and
Adhesive is supplied in pre-packaged kits containing resin,
hardener, and mineral fillers that produce a dense, uniform seal.
Typical applications for
Epoxy.com
Product #235 Chemical Resistant Novolac Epoxy Tile Grout and Adhesive
require superior resistance to thermal shock, chemicals, and heavy
traffic found in the harsh environments of dairies, bakeries, meat
packers, breweries, canneries, bottlers, distilleries, and
pharmaceutical plants
-
Epoxy.com Product #630 Novolac Coating/Mortar Binder - a
100% solids epoxy Novolac ideal for harsh chemical and solvent resistant
applications. It is ideal for use as a troweled mortar, slurry binder,
and coating for concrete and steel in extremely corrosive areas where
resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com
Product #630 Novolac Coating/Mortar Binder is ideal for use as a
protective coating for concrete and steel in the extremely corrosive
areas of chemical plants and pulp mills secondary containment areas,
water and waste treatment, and gas and electric utilities.
Other Products of Interest