GENERAL DESCRIPTION

Chemical Resistant Epoxy Coating Product #2 is a two component, 100% solids, Zero "0" VOC epoxy chemical resistant coating used to protect concrete, steel and other structural materials from non-oxidizing acids and alkalis for both interior and exterior applications.

APPLICATIONS

Typical Uses

• Aisle Ways
• Assembly Plants
• Bakeries
• Basement Floors & Walls
• Block Walls
• Bottling Plants
• Break Rooms
• Cafeterias
• Canning Plants
• Car Washes
• Cells
• Chemical Processing Areas
• Chemical Pump Areas
• Chemical Storage Area
• Church Floors
• Classroom Floors
• Corridors
• Educational Facilities
• Entrances
• Filters
• Food Plants
• Fork Lift Areas
• Health Care Facilities
• Hospitals
• Kennels
• Kitchens
• Laboratories
• Law Enforcement Facilities
• Laundries
• Leveling concrete
• Loading docks
• Locker Rooms
• Machine Shops
• Manufacturing Areas
• Marine Surfaces
• Meat Preparation Areas
• Mortuaries
• Nuclear Plant Floors
• Offices
• Patching concrete
• Photography Processing Areas
• Power Plants
• Printing Plants
• Produce Preparation Areas
• Pools
• Ramps
• Research Facilities
• Rest Rooms
• Restaurants
• Secondary Chemical Containment
• Semiconductor Plants
• Sewer Plants
• Shops
• Shopping Centers
• Shower Rooms
• Stores
• Show Rooms
• Supermarkets
• Tanks
• Veterinary Facilities
• Water Plants
• Warehouses
• & many others

ADVANTAGES

• Excellent chemical resistance
• Strong yet resilient
• Built in flexibility
• Sprayable
• Meets USDA standards
• 100% Solids - 0.0 lbs VOC

SURFACE PREPARATION

Surface to receive Product #2 Chemical Resistant Epoxy Coating must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast immediately prior to application. See Epoxy.com Surface Preparation Guide for more details.

MIXING INSTRUCTIONS FOR EPOXY #2

Temperature of Product #2 Chemical Resistant Epoxy Floor Coating must be 50° F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.

APPLICATION PROCEDURES FOR EPOXY #2

Epoxy Primer Product #899 (or for a more chemical resistant primer Product #12) is recommended for concrete surfaces. Apply with a roller, brush, or spray equipment. Two coats are recommended. Thickness per coat should be 7-10 mils. Seven days cure time is required to reach maximum chemical resistance. For more information before installing please see Epoxy.com installation tips.

LIMITATIONS - CHEMICAL RESISTANT COATING #2

Refer to Product #2 Chemical Resistance Chart for field tested results of common industrial chemicals that Product #2 has been exposed to. New concrete should be at least 28 days old. Temperature of substrate must be above 50° F. DO NOT thin.

SAFETY PRECAUTIONS

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

---

Related Products & Helpful Resources