Almost all our epoxy resins can be used as an epoxy bonding and adhesive systems. However, the thicker epoxies (epoxy gels) typically make the better adhesives, because they are easier to use when Appling a thick layer. Below is a list of medium to very thick epoxies. These epoxies are designed with the primary function of bonding various materials to other materials. Our Epoxy Gel Adhesives Systems are called by a number of different terms throughout the industry, including but not limited to: Epoxy Bonder, Epoxy Adhesive Systems, Epoxy Gel Adhesive Systems, Epoxy Bonding Systems, Epoxy Gel Patching Adhesive, etc. Epoxy.com Gel Adhesive Systems are zero (0) VOC. Having no VOCs means that Epoxy.com Epoxy Gel products meet even the strictest Low VOC requirements.
For thinner adhesives please see
Epoxy Decorative Stone Overlay Adhesive Resin - Product #17 - a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired. Zero (0) VOC Epoxy.
Epoxy Cove Base Binder -Product #720 - can be used to install an integral cove base for most Epoxy.com Flooring Systems, to provide seamless wall to floor protection. Zero (0) VOC Epoxy.
Product #2006 - Epoxy High-Mod Gel Adhesive and Bonding Resin is a 100% solids high-mod epoxy gel adhesive used for vertical and overhead bonding applications and structural repairs. Epoxy High-Mod Gel Adhesive and Bonding Resin - Product #2006 is also used as a grout for anchor bolts, dowels and rebar. Epoxy High-Mod Gel Adhesive and Bonding Resin - Product #2006 Meets ASTM C881 Requirements for Type I, Type II, Grade 3, Class B, C, D, E.
Product #2007 Epoxy Fresh Concrete to Hardened Concrete Adhesive is a two component, 100% solids epoxy resin system designed to bond new concrete to old and other materials to concrete. It has a convenient 2:1 mix ratio, by ASTM C-881-90, Types I, II, IV and V, Grade 2, Class "B" and "C" volume with a viscosity similar to heavyweight oil. Epoxy Fresh Concrete to Hardened Concrete Adhesive #2007 (adhesive) exceeds the requirements of ASTM C-881 Type II, Grade 2, Class "B" "C" "D" and E.