Epoxy.com Product #101 Epoxy Body Coat is an epoxy coating for commercial and light industrial floors. Epoxy.com Product #101 Epoxy Body Coat is designed for slurry and self-leveling epoxy flooring applications. Epoxy.com Product #101 Epoxy Body Coat helps to smooth seamless epoxy floors that are to receive Epoxy.com Seamless Epoxy Flooring and Epoxy.com Seamless Epoxy Coating (paint) systems. Epoxy.com Product #101 Epoxy Body Coat provides an extra thickness to protect the substrate from chemical attack. Epoxy.com Product #101 Epoxy Body Coat protects the substrate from impact and adds additional abrasion resistance to Epoxy.com Seamless Epoxy Flooring and Epoxy.com Seamless Epoxy Coating (paint) systems.
Epoxy.com Product #101 Epoxy Body Coat is a 100% solids Zero (0) VOC epoxy resin and epoxy hardener system.
Surface preparation is the first critical step to the installation of a quality seamless flooring system. All substrates to receive Epoxy.com Product #101 Epoxy Body Coat, should be properly prepared. See Epoxy.com Surface Preparation Guide for more details
Installation will vary by application. Contact Epoxy.com Technical Support Department for additional information.
Physical Properties | |
| Color | Light Grey, Brick Red, White, & Buff (other colors by request, subject to minimum quantity and/or upcharge) |
| Weight/gallon | 10.50-11.0 mixed |
| Solids Content | 100% |
| Mix Ratio | 4A to 1B by volume |
| Pot Life | 45 minutes @ 70° F |
| Viscosity | 1500 cps, mixed approx. |
| VOC | Zero(0) |
Dry Time | |
| 10-20 mil Film | 10-14 hours |
| Light Traffic | 16 hours |
| Ultimate Cure @ 74° F | 5 days |
| @50° F | 14 days |
Chemical Resistance |
|
| Reagent | Rating |
| Acetic Acid 5% | R |
| Ammonium Hydroxide 10% | R |
| Citric Acid 5% | R |
| Coca-Cola Syrup | R |
| Crude Oil | R |
| Diesel Fuel | R |
| Ethylene Glycol | R |
| Isopropyl Alcohol | R |
| Ketchup | R |
| Mineral Oil | R |
| Sodium Hydroxide 5% | R |
| Tri-sodium Phosphate 5% | R |
| Urea 6.6% | R |
| R = continuous service L = Limited Recommendation, occasional spills |
|
Performance Properties | |
| Tensile Strength ASTM-C-307 | 2,300 psi |
| Smoke Deposited ASTM E-162 | 4 mg. max. |
| Flame Spread ASTM-162 | 25 max. |
| Shrinkage ASTM C-531 | <0.5% |
| Thermal Coefficient of Expansion ASTM C-531 | 17.4 x 10-6 in./in./°F |
| Adhesion - ACI-503R | 300 psi (100% concrete failure Type I) |
| Hardness ASTM-D-2240 | 75 (Shore D) |
| Abrasion, Taber CS-17 ASTM-D-4060 | 0.065 g loss |
| Resistance to Elevated Temperatures | No slip or flow at required temperatures |
| Impact Resistance MTI-D-3134J | Withstands 16ft./lbs. no cracking, delamination or chipping |
| Indentation MIL-D-3134J | Withstands 2,000 lbs./sq.in. for 30 min. without indentation. |
| Heat Deflection Temperature ASTM D-648 | 110°F |
| Moisture Absorption | <1% |
| Flexural Strength ASTM-C-580 | 5,000 psi |
| Compressive Strength ASTM-C-579, 25 Day Cure | 12,000 psi |